INSTRUMENTS |
Desc :This is an ultra wide-range, battery operated, portable instrument for measuring Surface Resistivity of virtually any flat surface. In the circuit industry, products such as packaging materials, coponent storage bags and trays, work bench surfaces,table and floor mats, conveyor belts,etc., have resistance values which need to confirm to stringent specifications.
Specifications :
Measurment Range : 10^3 to 10^13ohms/sq
Measurment Accuracy : half decade
Excitation voltage : 9 V
Power Supply : 9 Volt DC battery
Low battery : Warning at 7.5 V
Dimension in mm : 125 x 75 x 29
Weight : 150 GMS
Calibration : Every 12 months
Traceability : To national standards
Warranty : 12 months
Electrostatic Alarm Z201 / Z202
Desc : The Electrostatic Alarm (available in 2 models: table-Z201 & pocket-Z202) is a portable, battery-operated instrument, instument, incorporating the latest technology, to indicate the approaching static electricity. It is designed to provide a quick
and convenient method of locating static charges and their approximate charged levels.
Specifications :
Detection Method : By Field Interception
Detection Sensitivity : 100 V
Range Selection : Autoranging
Indication : By Audible/Visual Alarm
Power Supply : 9 V Battery
Dimensions in mm : Table Model-125x75x29
Weight
Pocket Model-120x40x22
Table Model - 150 gms
Pocket Model - 50 gms
Static Eliminator (Ionizer) Z505 / Z506
Desc : This unit can be wall- mounted for a large coverage of the work area or fixed over an entrace doorway to neutralise the charges on personnel or on any item entering an ESD sensitive area.This acheived with stream of ionized air."Ion showering" is the only effective method of removing static charges from non-conductive objects and surfaces.
Specifications :
Air Flow : 1000 cu m/hr
Noise Level : 50 dba (at 1m)
Supply : 230 V AC 50Hz 40Watts
Ionization Voltage : 6-8 KV
Iron Balance : -/+ 50 V (in self-balanced)
Construction : Plastic Mould Enclosure
Dimensions in mm : 1040 x 300 x 180
Weight : 10 kgs
Warranty : One Year
Continuous Workstation Monitor Z803
Desc : The model Z803 continuously monitors the connections to earth of the wrist strap and work surface. This uses a resistance method that includes the operator's resistence. If the operator exceeds 10 Mohms or the work surface resistance-to-ground exceeds 4 Mohms, audible and visible alarms are triggered.This unit also warns of potentially dangerous low resistance situations.
Specifications :
Pass Range : Wrist Strap-0.8-10megohm
- - - - - - - -: Work Surface-0-4megohm
Power Supply : 9V/12V DC Adaptor
Main Unit Size : 60 x 35 x 15 mm
Weight : 175 gms
Docking Unit Size : 60 x 35 x 15 mm
Accuracy : +/- 10%
Warranty : One Year
Static Charge Meter Z401
Desc : The Static Charge Meter is a non-contact, low cost, light weight static monitoring and locating instrument. It utilises a centre-zero meter display to indicate the magnitude and polarity of the electrostatic charge.
Specifications :
Indicating Range : +/- 5KV FSD at 2.5cms
Display : Analog Meter Display
Accuracy : +/- 20% of Full Scale
Power Supply : 9V Battery
Dimensions in mm : 15 x 60 x 35
Weight : 165 gms
Warranty : One Year
Accessories : Carring Case
Wrist Strap & Footwear Tester Z103
Desc : Wrist straps and ESD footwears are the first line of defence against electrostatic charges build up on the human body.They are designed to carry away this charge as soon as it is generated. At The same time the wrist strap/footwear must remain electrically safe for the user. Thus, it is important to test every wrist strap/test footwear regularly.
Specifications :
Pass Range : Wrist Strap-0.8-10megohm
High Range Selection : Footwear-0.8-35megohms
Accuracy : Wrist Strap -10megohms
Power Requirement : ESD Footwear-35megohm +/- 10%
Low Battery : 9V DC Battery Orange-less than 7 Volts
Dimensions : 125 x 75 x 29 mm
Weight : 150g (without battery)
Warranty : 12 months
Reflow Oven RFO 300
RFO 300 is a powerful and compact reflow oven capable of soldering boards, curing glue or thick fil paste. Heating of the board is obtained by forced convection of hot air, giving the best among quality and productivity. With its superior performance and ease of use this oven is the best in its class. The Control System uses PID controller for temperature and digital adjustment of the conveyor speed. Cyclone speed is also adjustable. This unique control combination allows to achieve a great variety of temperature profiles, which allows the most demanding request to be soldered at ease.
RFO 300 is a powerful and compact reflow oven capable of soldering boards, curing glue or thick fil paste. Heating of the board is obtained by forced convection of hot air, giving the best among quality and productivity. With its superior performance and ease of use this oven is the best in its class. The Control System uses PID controller for temperature and digital adjustment of the conveyor speed. Cyclone speed is also adjustable. This unique control combination allows to achieve a great variety of temperature profiles, which allows the most demanding request to be soldered at ease.
Manual Stencil Printer MSP 500
The Manual Stencil Printer, MSP 500 enables Printing at the best and lowest cost with greatest simplicity, of use. MSP 500 is simple and easy to use and ensures reliability and durability. It allows printing on any kind of double-faced board. It can process maximum PCB side upto 500mm x 400mm.