COMPONENT
FORMING MACHINE |
Desc :This unit can cut & bend thousands of components per hour components ranging from 1/8 W to 2 W. The components are processed by a motor unit with instantaneous start and stop feature. The sequential cutting feature prevents axial tension in delicate components such as diodes.
Specifications :
Dimensions(l x w x h) : 330 x 160 x 175 mm
Weight : 10 Kg
Power : 10W(max) 220V, 50Hz
MANUAL CUT & BEND MACHINE FOR TAPED AXIALS MAP 860
Desc : MAP 860 is standard hand operated machine designed to cut and perform taped axial leaded components Component lead are cut and formed without causing damage to the leads which is most important in the case of delicate components. Easy adjustment of pitches and leg lengths. High quality cutting blades, for a clean and smooth cut & long life.
Specifications :
P |
B |
C |
L |
d |
D |
|
| Min mm | 6 |
4 |
1.3 |
3 |
0.4 |
2.0 |
| Max mm | 40 |
20 |
40 |
0.8 |
10.0 |
MANUAL CUT MACHINE FOR TAPED RADIALS MAP 860R
Desc : Map 860R is standard hand operated machine designed to cut and preform taped Radial leaded components. Component lead are cut and formed without causing damage to the leads which is most important in the case of delicate components.Easy adjustment of pitches and leg lengths. High quality cutting blades, for a clean and smooth cut & long life.
Specifications :
Dimensions(l x w x h) : 180 x 125 x 135 mm
Weight : 3.0 Kg Approx
Base & Slides : Light Alloy
Cutting Blades : High Speed Steel
Fixing : Clamp Fits to Bench or Table Top
CUT and KINK MACHINE FOR RADIALS ARP 750
Desc : ARP 750 is a semi automatic cut & kink machine for processing radial components. It can provide both stand off and snap in kinks to suit every requirements. The change over is done simply by adjusting the tensioner spring. The machine can process very small ceramic and paper capacitors as well as large electrolytic capacitors with the same ease, without changing any tool set. All moving parts are covered, giving vital importance to operator's safety.
Specifications :
(l x w x h) : 330 x 175 x 190 mm
Weight : 12 Kg Approx
Power : 100W(max.)220V,50Hz
Lead Dia (max.) : 1.0 mm soft wire
Lead Centre (max.) : 25.0 mm
UNIVERSAL MANUAL PREFORMER UMP 870
Desc : UMP 870 is a hand preformer. It cuts and forms Axial & Radial leads of loose components such as resistors, diodes, transistor & capacitors. It is ideal for low to medium volume production. Mahine with standard toolings is suitable for cutting and 90' bending of leads of axial components.
Specifications :
JUMPER
LINK MAKING MACHINE JMP 680 
Desc : JMP 680 is an fully automatic jumper forming machine
which forms perfect right angle cut & bend jumper link. Pitch size from
5-40 mm can be achieved just by adjusting the stroke without changing the
tools. The automatic material feeding system ensures that there is no damage
to the wire.
Specifications :
Dimensions(l x w x h) : 360 x 360 x 400 mm
Weight : 35 kg Approx
Speed : 7500 per hour
Power : 100W, 220V AC, 50Hz
Lead Leangth H : 6 mm
Jumper Length L : 5.0 to 40 mm
Wire Diameter D : 0.6 mm
PNEUMATIC LEAD CUTTER LCP 215
Desc : Model LCP 215 is a compact lead trimmer which greatle reduces operator fatigue and speeds up post solder board processing. It finds a variety of applications in electronic and electrical industries and accomodates lead sizes up to 0.8 mm(softwire). This light weight but heavy duty tool requires an operating pressure of 60-100 PSI. Cutting blades are made of special grade tool steel and duly heat treated. Orientation of the cutting blades is easily adjustable for operator's convience. Blades are easily replaced and entire mechanism is designed for quick servicing.